Construction

1. DC Low Indicator (15W, 120W & 240W only)
   The indicator turns on when the output voltage drops below 80 % of the rated value. This assists in troubleshooting power supply problems.
   
   
2. DC ON Indicator
   The indicator turns on when the unit is powered up. This is a convenient way to know when the power supply is receiving power.
   
   
3. Output Voltage Adjustment
   The output voltage can be easily adjusted within +/- 10 % of the rated voltage.
   
   
4. Universal Inputs
   The power inputs have a range of 85-264V AC to 100-350V DC, and automatically adjust to the correct input power. This makes IDEC power supplies suitable for use anywhere in the world. Power factor correction has also been included to minimize harmonic distortion, resulting in a longer operating life and increased reliability. The power supplies come with spring-up, fingersafe screw terminals.
    
5. Output Channel
   With very low output ripples of less than 1 % peak to peak, the power supplies are some of the best in the industry. The output comes with overload protection that prevents damage of the power supply and the spring-up, fingersafe screw terminals add a level of safety and ease for the user. The 240W power supply also has the convenience of two output terminals.

Top View

1. Fingersafe, Spring-up Screw Terminals
   Don’t worry about losing screws or getting an inadvertent shock from a terminal. The terminals are captive spring-up screws, which makes using them as easy as pushing a screw down and tightening it. They are shock- and vibration resistant, and work with ring lugs, fork connectors or stripped wire connections. The terminals are rated IP20 (when tightened) meaning they are recessed to keep fingers and objects from touching the input contacts.
   
   
2. Ventilation Grill
   Provides cooling for the power supply and prevents small objects from falling into the power supply circuitry.
   
   
3. DIN Rail Mount
   IDEC power supplies can quickly snap onto a DIN rail with built-in DIN rail clips, which require no additional brackets, or directly mountable on a panel which means installation is a snap. The PS5R Standard and Slim Series power supplies are spring-up terminal types that allow easy installation of ring lugs.
   

Overload Protection

All IDEC power supplies are designed with overcurrent and overvoltage protection to eliminate power supply or equipment damage. With overcurrent protection, the output voltage automatically drops due to excessive current. When the load returns to a normal level, normal output voltage is restored. With overvoltage protection, the power shuts down when an overvoltage occurs. Only a manual reset can turn the power back on.

Approvals

IDEC power supplies are very reliable, with a life expectancy of 70,000 hrs (minimum) or longer, depending on usage. 

SEMI F47 approved

SEMI F47 defines requirements for semiconductor processing and automated test equipment. The equipment must tolerate voltage sags on the AC power line without interrupting operations. 

The graph shows how the equipment must tolerate sags to 50 % for 200ms, sags to 70 % for up to 0.5 seconds, and sags to 80 % for up to 1 second. 

Derating

All IDEC Slim Line power supplies are listed to UL508, which allows operation at 100% capacity inside a panel. This eliminates the need to use oversize power supplies. 

The charts above show that the PS5R-S 10W and 15W (at 60º C), 30W/60W/90W (at 55º C), 120W (at 40º C), and 240W (at 45º C) meet the ambient temperature required by UL508 and EN60950 standards to operate at an output current of 100 %.

NOTE! Insure convection. Do not block the opening of the switching power supply. Keep at least 20 mm clearance around the switching power supply.

Approvals

CE Marked, TÜV, c-UL, UL508, UL1310 (PS5R-SB, -SC, -SD), UL1604, EN 50178:1997, LVD: EN60950:2000, EMC: Directive EN61204-3:2000 (EMI: Class B, EMS: Industrial

Ordering Information

Brochure

Certificates

Drawings